佰润机械科技(沧州)有限公司

产品详情

BR-280S吸附式单面机

产品详情

用途与特点:

◆ 设计速度:100m/min。

◆ 有效幅宽:1400mm-2200mm。

◆ 楞 辊:φ280mm。

◆ 驱动减速箱采用浸油润滑,减小噪音,万向节传动,隔离动力源。

◆ 上瓦辊、压力辊、涂胶辊升降,均以气动控制。

◆ 导纸方式采用真空吸附,带风量调节装置,保持高速状态下瓦楞楞型的稳定。

◆ 瓦辊、压力辊轴承采用耐高温润滑脂润滑。

◆ 涂胶部采用自动循环供胶。

◆ 上下瓦楞辊采用48CrMo优质铬钼合金钢,经过热处理,硬度在HRC58o-60o表面经研磨。

◆ 涂胶辊表面经过网纹刻花及镀铬处理。

◆ 手动或电动隔胶装置。

◆ 涂胶部停机可独立运转或不独立运转两种方式,主电机变频控制(选装)。


◆ Design Speed: 100m/min

◆ Effective width: 1400mm-2200mm

◆ Corrugated roller:φ280mm

◆ Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. adopt gimbal transmission. separate power.

◆ Corrugating roller, pressure roller and glue roller by pneumatic adjustment.

◆ Cardboard transmit adopt vacuum suction method, with wind control system. keep flute profiles stable of the lower-roller in the condition of running up.

◆ Bearing of corrugated and pressure roller adopt high temperature lubricate grease.

◆ Glue parts auto supply glue circularly.

◆ The upper-lower corrugating roller are made of 48CrMo high quality alloy steel, after heat-treatment. The hardness HRC58o-60o,the surface be grinded.

◆ The glue part surface are treated by special mesh snicked and chromeplated.

◆ Motorized or manual glue width dividing to match the paper width.

◆ Glue part can be running independently or non-independently while stopped. Adopt main motor frequency conversion control. (optional)

在线客服
 
 
 工作时间
周一至周五 :8:30-17:30
周六至周日 :9:00-17:00
 联系方式
马经理:13903172076